Material collection system

The material collection system is used to collect bulk or bagged raw materials into storage silos in various ways.
Bulk materials can be sent directly to the storage tank through the pneumatic conveying device on the tanker, and the bag materials are collected by the bag opening station.
The contact materials of the bag opening station tanks are all stainless steel, and the inner surface is polished with a sealed structure. The bag opening station has two ways as automatic opening and manual opening.
The manual bag opening station is composed of a protection door, vibrating sieve, magnetic frame, arch breaker, etc..
The protection door has inside and outside layers; the outside layer is stainless steel. It can load material bags when opened and become a sealed tank when closed. It has a soft curtain door with an inside layer, which can prevent the dust from diffusing when materials are discharged.
The vibrating sieve can screen out the impurities in the powder effectively, such as sewing thread, shredded paper, large particles, etc.
The magnetic frame can initially remove the iron impurities in the materials.
The arch breaker equipment, composed of an air cylinder and an arch breaker,
makes the materials flow smoothly.
The automatic opening station is composed of a conveyor, a bag opening, a filter, a collector, a drain hole and etc.. The bags are fed enter the bag opening by conveyor, there are helical reamers in the bag opening equipment, the materials and bags are sent to the filter by rotational movement, the filter separates the materials and the bags, the materials will enter the collector, the broken bags will be discharged from the drain hole.

---