How to lay SPC flooring on floors with underfloor heating and plumbing

How to lay SPC flooring on floors with underfloor heating and plumbing

Jiahao machinery is flooring line suppliers, specializing in SPC line,LVT line,wpc floor production line for the past 20 years. Please contact us immediately to obtain excellent service and quality.

For ground heating (electric or water heating), the following requirements should be met during the laying process:

1) When installing the floor, the moisture content of the floor should not exceed 10%; Before laying the floor, verify whether the Hydronics operates normally and evaporate all residual moisture;

2) Three to four days before the installation of the floor, the Hydronics drops to a suitable installation temperature (about 18 ± 3 ℃ in the room); Geothermal heating must use standard functional elements, and the temperature of the Hydronics reaching the cement floor should not exceed 55 ℃;

3) It is strictly prohibited to chisel, nail, or drill holes on the ground with a geothermal heating system; When installing geothermal flooring, the surface temperature should be maintained at around 18 ℃. Before installation, gradually raise the temperature of the cement floor by 5 ℃ every day until it reaches the standard of around 18 ℃. Within the first 3 days after installation, it is necessary to continue to maintain this temperature. Only after 3 days can the temperature be raised as needed, and only 5 ℃ can be raised daily.